Construction materials
TMT Steel Supplier in Bengaluru.
Reinforcement bars in Fe 500, Fe 500D, Fe 550 and other grades, supplied to the grade and diameter on your structural drawings.
What we supply
TMT Steel Options.
Reinforcement steel supplied to the grade and diameter your design calls for.
- Fe 500
- Fe 500D
- Fe 550
- other grades
TMT steel grades
Reinforcement bars follow IS 1786. Fe 500 is the everyday grade for homes; Fe 500D and 550D carry a “D” for higher ductility, preferred where seismic detailing matters. Common diameters run 8 mm to 32 mm. Check for the ISI mark, the grade rolled into the bar and the manufacturer’s test certificate.
Storing on site
Stack bars off the ground on timber or blocks and cover them. Light surface rust is normal; flaking or pitted rust is not.
Choosing well
Ordering TMT Steel for Your Site.
A plain-language guide. Always follow your structural engineer’s specification.
01
Choosing the grade
Bar grade comes from the structural design. Fe 500 is the everyday grade for homes; Fe 500D is preferred where seismic detailing matters.
02
Quantities by diameter
Share your bar bending schedule (BBS) if you have one, so the quotation lists each diameter in the quantity that will actually be cut and tied.
03
Checking what arrives
Look for the ISI mark and the grade rolled into the bar, and ask for the manufacturer’s test certificate with the delivery.
Before you enquire
Have These Handy.
You do not need all of them. The more you share, the more precise the first quotation will be.
01
Material and grade
For example OPC 43 cement, Fe 500D TMT 12 mm, 20 mm aggregate. If unsure, tell us the stage of construction.
02
Approximate quantity
Bags, tonnes, loads or square feet. A range is fine.
03
Delivery location
Site address or area, and whether a large truck can reach the gate.
04
Timeline
When you need the first delivery and how the rest should be spaced.
05
Drawings or BOQ
If you have them, attach or share on WhatsApp after the call.
06
Contact preference
Call or WhatsApp, and a good time to reach you.
Often ordered together
Related Materials.
Most sites order these in the same stage. One quotation can cover all of them.
Aggregates / Jelly
Graded granite aggregates for concrete, footing and road work.
- 12mm
- 20mm
- 40mm
- other sizes
Ready Mix Concrete
RMC arranged to your grade and pour schedule, site conditions permitting.
- Project-specific grades
FAQ
Common Questions.
Short answers to the questions we hear most. For anything project-specific, send an enquiry.
- Should I choose Fe 500 or Fe 500D?
- Follow your structural engineer’s specification. Fe 500D has higher ductility and is preferred where seismic detailing matters; Fe 500 is the everyday grade for most homes.
- Do you publish prices?
- No. Material prices move with brand, grade, quantity and delivery location, so every quotation is prepared for the specific project. Send an enquiry and we will itemise it.
- Is there a minimum order?
- We supply single-site quantities for homeowners as well as bulk supply for contractors. Small orders may carry a delivery charge, which is shown on the quotation.
- Can you supply a specific brand?
- Usually yes. Tell us the brand and grade you need and we will confirm availability for your location before quoting.
- How quickly can you deliver?
- Stock items around Bengaluru typically go out within a few working days of order confirmation. Larger or scheduled supplies are planned against your construction stages.
- Do you supply outside Bengaluru?
- Yes. We serve projects across Karnataka. Delivery lead time and charges depend on distance and vehicle access at site.
Planning to Build?
Tell us what you’re building. We’ll help you understand the materials, requirements and next steps.