Construction materials
Materials, From Foundation to Finishing.
Cement, steel, sand, aggregates, blocks, bricks and ready mix concrete, through to plywood, laminates, hardware and other interior materials — sourced and coordinated through one team across Karnataka.
What we supply
Construction Materials, From Foundation to Finish.
Source essential construction materials through one coordinated team, with options across major material categories and brands.
Structural materials
TMT Steel
Reinforcement steel supplied to the grade and diameter your design calls for.
- Fe 500
- Fe 500D
- Fe 550
- other grades
Aggregates / Jelly
Graded granite aggregates for concrete, footing and road work.
- 12mm
- 20mm
- 40mm
- other sizes
AAC Blocks
Lightweight blocks that reduce dead load and speed up masonry.
- Lightweight
- multiple thicknesses
Ready Mix Concrete
RMC arranged to your grade and pour schedule, site conditions permitting.
- Project-specific grades
Finishing & building materials
Tiles & Flooring
Flooring options for residential and commercial interiors.
- Vitrified
- Ceramic
- Granite
- Marble
Plumbing Materials
Pipes, fittings and accessories for the full run.
- Pipes
- Fittings
- Valves
- Accessories
Electrical Materials
Wiring and accessories matched to your load plan.
- Wires
- Cables
- Switches
- Conduits
Sanitary Ware & CP Fittings
Sanitary ware and chrome-plated fittings for bathrooms.
- Basins
- WC
- Faucets
- Showers
Doors & Windows
Door and window options for every opening in the plan.
- Main
- Internal
- UPVC
- Aluminium
Waterproofing Materials
Protection for roofs, wet areas and basements.
- Chemicals
- Coatings
- Membranes
Paints & Finishing
Paint systems from putty to final coat.
- Interior
- Exterior
- Primer
- Putty
Glass & Architectural
Glazing and architectural glass for facades and interiors.
- Glazing
- Facade glass
- Partitions
Wall Cladding
Exterior and feature wall cladding options.
- Exterior
- Feature wall
- Stone
- HPL
Adhesives & Chemicals
Construction chemicals and adhesives for finishing work.
- Tile adhesive
- Grout
- Admixtures
- Sealants
Other Materials
Tell us what your project needs and we will source it.
- Project-specific
Interior materials
Boards & Plywood
Plywood and engineered boards for wardrobes, kitchens and furniture.
- Commercial Plywood
- BWP Plywood
- MR Plywood
- MDF
- HDHMR
- Particle Board
- OSB
Laminates & Finishes
Surface finishes and edge bands for boards and shutters.
- Decorative Laminate
- Acrylic Laminate
- PET High Gloss
- PU Paint Finish
- Veneer
- Natural Veneer
- Edge Band
- PVC Edge Band
Kitchen Hardware
Fittings and mechanisms for modular kitchens.
- Soft-close Hinges
- Soft-close Drawer Channels
- Tandem Drawers
- Bottle Pull-out
- Cutlery Basket
- Plain Basket
- Corner Carousel
- Tall Unit Pull-out
- Lift-up Mechanism
- Profile Handle
- G / J Profile
Handles & Accessories
Handles, knobs and profiles for cabinets and shutters.
- Cabinet Handles
- Knobs
- Aluminium Profile
- Glass Profile
Interior Glass & Mirrors
Glass for shutters, partitions, backsplashes and mirrors.
- Clear
- Toughened
- Fluted / Reeded
- Tinted
- Back-painted
- Mirror
PVC, Acrylic & WPC
Boards for wet areas, cladding and signage-style finishes.
- PVC Foam Board
- WPC Board
- Acrylic Sheet
False Ceiling
Boards and panels for false ceilings and partitions.
- Gypsum Board
- MR Gypsum Board
- Cement Board
- Mineral Fibre Tile
- Aluminium Panel
Profiles & Metal
Framing sections for ceilings, partitions and furniture frames.
- GI Stud
- GI Track
- GI Channel
- MS Square Pipe
- Aluminium Profile
Countertops
Stone and engineered surfaces for kitchen and vanity tops.
- Granite
- Quartz
- Sintered Stone
- Marble
Adhesives & Consumables
Adhesives, sealants and fixings for carpentry and drywall work.
- Wood Adhesive
- Contact Adhesive
- Silicone Sealant
- PU Foam
- Wood Screws
- Drywall Screws
- Wall Plugs
Flooring & Wall Panels
Interior flooring and decorative wall panels.
- SPC Flooring
- Laminate Flooring
- Engineered Wood
- Wooden Fluted Panel
- PVC Fluted Panel
- WPC Fluted Panel
- Wallpaper
Lighting & Switches
Lighting and switchgear for interior fit-outs.
- LED Strip
- LED Profile
- Downlight
- COB Light
- Track Light
- Modular Switches
- Modular Sockets
Furniture Materials
Upholstery, soft furnishing and window materials.
- Fabric
- Leatherette
- Foam
- Curtain Fabric
- Blinds
These are material categories, not fixed stock. Availability and brands depend on project requirements.
Material guide
Know What You Are Ordering.
A plain-language guide to the grades and standards you will see on quotations and delivery challans. Always follow your structural engineer’s specification.
CEMENT
Cement grades
OPC 33, 43 and 53 are all covered by IS 269:2015; the number is the minimum 28-day strength in MPa. OPC 43 suits most residential RCC and plaster; OPC 53 is for high-strength or early-strength work. PPC (IS 1489) gains strength slower but is more durable and is common for homes. PSC (IS 455) resists sulphates and suits wet or coastal exposure.
STEEL
TMT steel grades
Reinforcement bars follow IS 1786. Fe 500 is the everyday grade for homes; Fe 500D and 550D carry a “D” for higher ductility, preferred where seismic detailing matters. Common diameters run 8 mm to 32 mm. Check for the ISI mark, the grade rolled into the bar and the manufacturer’s test certificate.
SAND
Manufactured sand (M-sand)
Manufactured sand is crushed and graded granite, so its quality is consistent batch to batch. Concrete M-sand is coarser; plastering M-sand is finer and washed. It should meet the grading zones in IS 383.
AGGREGATE
Aggregate sizes
Coarse aggregate is specified by nominal size under IS 383. 12 mm is used for slabs, lintels and thin sections; 20 mm for footings, columns and beams; 40 mm for PCC beds and mass concrete. Angular, well-graded stone gives a denser, stronger mix.
MASONRY
Bricks, blocks and AAC
Burnt clay bricks follow IS 1077. Solid and hollow concrete blocks follow IS 2185 Part 1 and are quicker to lay for compound walls and infill. AAC blocks (IS 2185 Part 3) are light, cut easily and insulate well, which reduces dead load on the structure; they need a thin-bed adhesive or the right mortar.
RMC
Ready mix concrete
RMC is batched at a plant to IS 4926 and delivered by transit mixer. Homes typically use M20 to M30, where the number is the characteristic strength in MPa. Plan the pour around travel time, check slump on arrival and keep cube samples for testing.
On site
Storing Materials Properly.
Good material can be spoilt by poor storage. A few habits protect what you have paid for.
01
Cement
Keep bags dry on a raised platform, away from walls, and use them within about three months of manufacture. Lumps that do not crumble mean the bag has set.
02
TMT steel
Stack bars off the ground on timber or blocks and cover them. Light surface rust is normal; flaking or pitted rust is not.
03
Sand and aggregate
Store in separate bays on a hard surface so they do not mix with soil or each other. Cover sand during rain to control moisture.
04
Bricks and blocks
Stack on level ground, no more than a metre high. Keep AAC blocks dry before use; wet clay bricks a day before laying.
05
Ready mix concrete
Have formwork, reinforcement and labour ready before the mixer arrives. Concrete should be placed within the time the plant specifies on the challan.
From Requirement to Site.
Supply process01
Tell Us What You Need
02
Understand Your Project
03
Recommend Suitable Materials
04
Prepare Your Quotation
05
Confirm Requirement
06
Coordinate Supply
07
Deliver to Site
FAQ
Common Questions.
Short answers to the questions we hear most. For anything project-specific, send an enquiry.
- Do you publish prices?
- No. Material prices move with brand, grade, quantity and delivery location, so every quotation is prepared for the specific project. Send an enquiry and we will itemise it.
- Is there a minimum order?
- We supply single-site quantities for homeowners as well as bulk supply for contractors. Small orders may carry a delivery charge, which is shown on the quotation.
- Which cement grade should I buy?
- Follow the grade in your structural drawings. If nothing is specified, OPC 43 or PPC covers most residential work; OPC 53 is not automatically better for plaster or masonry.
- Can you supply a specific brand?
- Usually yes. Tell us the brand and grade you need and we will confirm availability for your location before quoting.
- How quickly can you deliver?
- Stock items around Bengaluru typically go out within a few working days of order confirmation. Larger or scheduled supplies are planned against your construction stages.
- Do you supply outside Bengaluru?
- Yes. We serve projects across Karnataka. Delivery lead time and charges depend on distance and vehicle access at site.
Planning to Build?
Tell us what you’re building. We’ll help you understand the materials, requirements and next steps.